Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. USE
4.1. Press UP button, the heater starts to work at high power
setting.
4.2. Press DOWN button, the heater is power off.
4.3. Scroll the wheel to vary the heating from LOW-MED-HIGH, or
from HIGH-MED-LOW, pic. H
4.4. You can also adjust the heat using the DOWN button: press and
hold the button until it switches to the next level. As soon as the
desired level is reached, release the button.
5. Set My favorite power level
5.1. Select the favorite power level (LOW, MED, HIGH), and
then press "MY "button for approx. 5 seconds. The lamp will
be ON/OFF in one cycle, my favorite power level has been
set to the MY button. Briefly press MY button when the
heater is in standby or other power level, the heater will
start to work or set to the favorite power level.
5.2. Power on the unit by pressing "MY" button and hold
the button "MY" (approx. 5 seconds) to remove my favorite
power setting.
INSTALLATION
Before installation, read the manual carefully.
The heater must be installed in accordance with the manufacturer's installation instructions
This heater comes with a pair of stainless-steel adjustable angle mounting brackets. The adjustable angle enables the
heater to be installed on vertical, horizontal and inclined surfaces.
Ceiling mounted
IOBRELG3000
19
Werbung
