ECOVACS DEEBOT X5 OMNI Bedienungsanleitung Seite 33

No. Malfunction
11 Delay in remote control�
After returning to the Station,
12 DEEBOT does not empty the Dust
Bin�
13 Fail to empty the Dust Bin�
The inner side of Dust Collection
14
Cabin is dirty�
Dust leakage occurs during work-
15
ing�
16 Mopping Pad Plate cannot rotate�
DEEBOT does not respond to the
17
Station instruction�
Possible Causes
The Wi-Fi signal is poor, causing the video loading to
be slow�
The Auto-Empty function has not been turned on in
the ECOVACS HOME App�
Dust Bag is not installed in the Station�
Manually moving DEEBOT back to the Station might
not trigger Auto-Empty function�
In Do Not Disturb mode, DEEBOT will not empty the
dust after returning back to the Station�
The Station detects a decrease in empty efficiency�
If the above possible causes have been ruled out,
components of the Station may be abnormal�
The Station detects a decrease in empty efficiency�
The outlet of Dust Bin is blocked by foreign objects�
Fine particles are absorbed in the inner side of Dust
Collection Cabin through the Dust Bag�
The Dust Bag is broken�
The outlet of Dust Bin is blocked by foreign objects�
Mopping Pad Plate is not correctly installed�
The Mopping Pad Plate is blocked by foreign objects�
DEEBOT is not in the Station�
Solutions
Use DEEBOT in areas with good Wi-Fi signal�
Turn on the Auto-Empty function in the ECOVACS HOME App�
Install the Dust Bag, and close the Dust Collection Cabin�
It is recommended to let DEEBOT return to the Station on its own�
Please do not manually move it�
Turn off Do Not Disturb mode in ECOVACS HOME App or manual-
ly start dust-emptying�
Replace the Dust Bag according to the [Maintenance] section and
close the Dust Collection Cabin� If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again�
Please contact Customer Support for help�
Replace the Dust Bag according to the [Maintenance] section and
close the Dust Collection Cabin� If the Dust Bag is not full when
ECOVACS HOME App prompts, you can put it back again�
Remove the Dust Bin and clean the foreign objects on the outlet�
Clean the inner side of Dust Collection Cabin�
Check the Dust Bag� Replace it�
Remove the Dust Bin and clean the foreign objects on the outlet�
Please install Mopping Pad Plate correctly� A sound of Click means
properly installation
Clean the foreign objects�
Please make sure DEEBOT is in the Station�
33 EN