Crivit SP-07 Gebrauchsanleitung Seite 16

LED-rear light SP-07
• Now reattach the cover using the screws (Fig. L).
• Battery type:
5. Cleaning and care
The housing of the LED rear light can be cleaned with a damp cloth.
6. Disposal
Please do not dispose of flat batteries via the household waste, but instead use the collecting
container intended for this purpose.
Technical data
LED rear light
Risk group: Free group (the luminaire does not represent a photobiological hazard)
key to the symbols
Declaration of conformity (see chapter „Declaration of conformity"):
Products marked with this symbol comply with all applicable European Community
regulations Economic area.
Protection class lll. The LED light is supplied with low voltage via a battery.
Expiry date (11/2024)
helmet weight S/M: ~250 g M/L: ~290 g
Date of manufacture (11/2019)
The Seal of Approved Safety (GS mark) certifies that a product meets the
requirements of the German Product Safety Act (ProdSG). The GS mark
indicates that the safety and health of the user are not at risk if the product is
used as intended and if foreseeable misuse of the marked product occurs.
2 x LR1130, 1,5V
16