Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In the Then part, a distinction is made between
•
"When conditions are met" -> Action is executed if the conditions specified in the If part apply
•
"When conditions are not met" -> Action is executed if the conditions specified in the If part NO LONGER apply
Example configuration of an automation:
Name / symbol assignment
The following action selections are available if "System" is selected in the Then section of scenes or automations:
Video Log: Create a log entry (15 sec) with a section of the camera recording.
Push Event Video: Send a push message with definable text and section (15 sec) from the
camera recording.
Push Text: Send a push message with definable text.
Delay: Adjustable delay in seconds - e.g. between two actions
6.5. Factory Reset
To reset the system to factory settings, press and hold the reset button (see 2.3 Device description) for >10 seconds and
release it again. The control panel LEDs will go out after a few seconds and the system will restart. After the restart, the
alarm panel is reset to the factory settings and can be set up again.
If part
→
Category selection
→
Then part
→
|27
Werbung
