Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3. Cameras (NVR)
Using the ONFIV integration protocol, various cameras from the ABUS Professional Line can be integrated into the Comfion
wireless security system. You can integrate up to 4 cameras into the Comfion system and have them record (SD or SSD) if
an event occurs, when the system is armed or continuously (24/7).
A hard drive (SSD) is required in the control panel for continuous recording.
Note
3.3.1. Integration of cameras
In the factory setting, the Comfion system automatically searches for ONFIV cameras in the network and adds them
to the system. You can deactivate the automatic camera search in the camera overview in the camera settings.
Proceed as follows when integrating the cameras:
1.
Integrate the camera into the same network as the Comfion.
2.
Open the ABUS IP Installer and activate the camera.
3.
Open the camera interface, log in as the installer and open the configuration.
4.
In the advanced network settings under integration protocol, set ONVIF, save this setting and create an ONFIV
user -> assign the same user name and password as an existing admin or installer for the camera.
5.
Make the video settings in the camera described in the info-box below
6.
Store the ONFIV user data in the Comfion system
7.
Test the camera functions (live view, etc.)
The following video stream settings are recommended depending on the number of integrated cameras
Note
(channels) in order to ensure an interference-free stream even when 4 channels are called up
simultaneously and recorded continuously.
Primary stream:
•
1 channel: 1080p resolution; bit rate: 8192kbps
•
2 channels: 1080p resolution; bit rate: 4096kbps
•
3 channels: Resolution 1080p; bit rate: 2730kbps
•
4 channels: Resolution 1080p; bit rate: 2048kbps
Secondary stream:
•
1-4 channels: Resolution: 360p; bit rate 512kbps
•
The max. resolution of 4MP per channel must not be exceeded
Note
•
The max. bit rate must not exceed 4 x 2048kbps = 8192kbps at any time (all channels added up)
|15
Werbung
