Maintenance - EUROM QH1503 Bedienungsanleitung

MAINTENANCE

Before you perform maintenance on the heater, you have to turn off the power supply.
This heater does not require any specific maintenance. Keep the ventilation and radiation open-
ings, as well as the heat screen, clean and dust-free, but when cleaning the quartz elements, make
sure that you do not touch them; it is best to blow any dust away frequently.
To clean the exterior, use a soft cloth which can be damp. At the very most, use a mild cleaning
agent: no abrasives or sponges and no caustic substances.
If a defect occurs, disconnect the heater from the power supply and go to a service point. Do not
perform any repairs yourself and always ask that original parts are used in any repairs.
REMOVAL
In the EU this symbol indicates that this product may be disposed of as ordinary
household waste. Old equipment contains valuable materials, suitable for recycling.
These materials should be made suitable for reuse in order to prevent any adverse
effects to health and the environment caused by unregulated waste collection. Therefore,
please make sure that you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure that as many of the
components as possible can be recycled.
CE-STATEMENT
Euromac bv., Genemuiden-NL hereby declares that the EUROM electric bathroom
type QH1503, comply with the LVD guideline 2006/95/EC and the EMC guideline 2004/108/EC &
RoHs Richtlinie 2011/55/EU and meet the following standards:
EN 60335-1:2012
EN 60335-2-30:2009+A11 :2012
EN 62233 :2008
Genemuiden,10/09/2014
W.J. Bakker, alg. dir.
EN 55014-1 :2006/+A1 :2009/+A2 :2011
EN 55014-2 :1997/+A1 :2001/+A2 :2008
EN 61000-3-2 :2006/A1 :2009/+A2 :2009
EN 61000-3-3:2008
14
heaters,