Bresser 5x50 Night Vision Bedienungsanleitung Seite 16

Increase the light intensity of the illuminator: When the infrared illuminator
is switched off, it can be switched back on again with a single press of the
button. The status LED begins to light red. When the infrared illuminator
is switched on (status LED lights red), the light intensity is increased, until
it reaches 100%, with each press of the button. If the maximum output is
reached, a further press has no effect.
Multifunction button (2 functions):
• Switch on the infrared illuminator
• Decrease the light intensity of the illuminator
Decrease the light intensity of the illuminator: When the infrared illuminator
is switched on (status LED lights red), the light intensity of the infrared
illuminator is decreased, with a single press, until the infrared illuminator
is switched off and the status LED lights blue. A further press has no
effect.
16
Taking photos
By pressing the photoshot button, you will take a picture of the live image,
which is then stored. The resolution of the photo image is 640 x 480
pixels.
e
c
1. Battery charge
2. SD card status
3. Photo mode
4. Number of images available
b