Status Displays - Lenze EMZ2221IB Montageanleitung

Elements
Pos. Description
0
Key T1 for starting the data transmission from the card module to the
basic device (download)
1
Key T2 for starting the data transmission from the basic device to the
card module (upload)
2
Key T3 for selecting the program memory location (
l
Press the key repeatedly until the desired program memory location
appears on the 7−segment display.
3
Fixing screw
4
7−segment display
5
Status display (green)
6
Status display (yellow)

Status displays

Item Colour
5
green
6
yellow
7−segment display
Display
0 ... 9
a ... f
Rotating bar
–
r
e1 ... e8
ef
EDKMZ2221IB DE/EN/FR 7.0
Status Notes
off Data of the selected program memory location are not compatible
with the basic device connected.
on Data of the selected program memory location are compatible with
the basic device connected.
off Program memory location on the memory card is unoccupied.
on Program memory location on the memory card is occupied with data.
Description
Display of program memory locations 0 to 9
Display of program memory locations 10 to 15
Data transmission
Execution of an internal calculation
Resetting the basic device, i.e. the control is reset to the original state
and the data are downloaded subsequently.
Error code
Formatting of the memory card
0
to
l
See
^ 36
^ 35
F
)
^
^
^
below
below
below
23