For delicate surfaces complete the measurement
on a section that is not in the visible area.
Note: The measuring pins
are sharp and may
2
dent or damage the surface.
Rub the damp residue on the surface before taking
the measurement.
Measure several places and take an average value.
Be aware that salts can increase the conductivity
of water. This can lead to incorrect readings and
results that are too high.
Remove the bark from firewood if needed. Press
the measuring pins
against the grain in various
2
places on the wood.
Taking a measurement
Press the
button
to turn on the product.
4
On the display
"0.0%", the surrounding tem-
8
perature in °C and the previously selected material
1‒6 (see table reference values) appears.
56
GB/IE