Ransomes HR6010 Sicherheits-, Bedienungs- Und Wartungshandbuch Seite 64

10 PROBLEM SOLVING
10.2.3 Scalping
NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are lower than
normal.
Turf too uneven for the mower to follow.
Cutting too much grass at one time.
Mowing (ground) speed is too fast.
en-62
Scalping is a condition in which areas of grass are
cut noticeably shorter than the surrounding areas,
resulting in a light green or even brown patch. This
is usually caused by an excessively low height-of-
cut setting and/or uneven turf.
Remedy
Check and adjust the HOC settings. (Refer to Parts &
Maintenance Manual.)
Change mowing direction.
Mow more often.
Reduce mowing (ground) speed.