SPECIFICATION 4
4.5
NOISE EMISSIONS
When the machine was tested for sound pressure (Operator Ear).
The Machinery Safety Directive 2006/42/EC
And
Exposure Of Workers To The Risks Arising From Physical Agents (Noise) Directive 2003/10/EC
By compliance to:
The Lawnmower Standard BS EN ISO 5395:2013
And
Sound Pressure Standard EN ISO 3746: 2010
Measured Sound Pressure 89.3 dB(A) ± 0.86 LWA
When the machine was tested for sound power (Noise in the Environment).
The Machinery Safety Directive 2006/42/EC
And
Noise Emission In The Environment By Equipment For Use Outdoors
Directive 2000/14/EC
By compliance to:
Sound Power Standard EN ISO 3744:2010
Measured Sound Power 104 dB(A) ± 0.86 LWA
4.6
SLOPES ____________________________________________________________
DO NOT USE ON SLOPES GREATER THAN17° FOR CAB EQUIPED MODELS THE MAX SLOPE for ROPS
IS 24°.
This slope was calculated using static stability measurements according to the requirements of BS EN ISO 5395
en-17