During operation, storage and installation, the room should
have an area of at least 4 m² in order to ensure an adequate
amount of air in case of damage to the refrigeration system.
If the refrigeration system has nevertheless become
damaged, ventilate the room. Evacuate the room. Avoid
naked flames and ignition sources. Have the appliance
repaired by a qualified technician before using it again.
Tampering with the refrigerant circuit is prohibited and
invalidates the warranty.
Do not use agents other than those recommended by
the manufacturer to speed up the thawing process or for
cleaning.
Extremely flammable gas: Avoid naked flames, sparks and
ignition sources when using, maintaining and disposing of
the appliance.
Contains pressurised gas; can explode when heated.
In the event of a fire, do not extinguish any leaking gas until
the leak can be safely eliminated.
During repair and maintenance work (or when working
with heat on the appliance): Have a powder or CO
extinguisher nearby for emergencies.
Store the appliance in a well-ventilated place away from
sunlight.
Do not remove safety signs, stickers or labels from the
appliance and ensure they are legible.
Ensure that national gas regulations are complied with.
Use the appliance only with the intended refrigerant R290.
WARNING!
Only allow maintenance and repair work to be carried out on
the refrigerant circuit by a qualified technician according to
the manufacturer's specifications.
184
2
fire