Toshiba MMU-AP0091H Betriebsanleitung Seite 16

Right/Left air direction adjustment
To change the air outlet direction to right or left side, set the vertical flap inside of the horizontal flap to the
desired direction.
High Wall Type
Adjustment of air direction upward/downward
[In Cooling operation]
In cooling operation, use the horizontal flap with horizontal
set point so that the cold air diffuses in whole room.
[In Heating operation (For Heat-pump model only)]
In heating operation, use the horizontal flap with downward
set point so that the hot air blows at the foot.
• If cooling operation is performed with downward air outlet, dew may fall on surface of the cabinet or the
horizontal flap resulted in dripping.
• If heating operation is performed with horizontal air outlet, unevenness of temperature may increase in
the room.
• Do not move the horizontal flap directly with hands; otherwise a trouble is caused. Select direction of the
horizontal flap using
ately even if the switch is pushed. Adjusting the stop position, push the switch.
Adjustment of air direction rightward/leftward
To change the air outlet direction to right or left side, set the vertical
flap inside of the horizontal flap to the desired direction.
Setup of air direction and swinging
Refer to description of "2-way Air Discharge Cassette Type".
• If cooling operation is performed with downward discharge,
dew may fall on surface of the cabinet or the horizontal flap
resulted in dripping.
• If heating operation is performed with horizontal discharge,
unevenness of temperature may increase in the room.
REQUIREMENT
switch on the remote controller. The horizontal flap does not stop immedi-
13
INFORMATION