Herunterladen Diese Seite drucken

Bartscher 900 MASTER Serie Bedienungsanleitung Seite 30

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Abnormal functioning
If for any reason, the appliance does not start up or stops working during use, check that the
energy supply and the control knobs are set correctly; if all is regular, call customer service.
CARE AND MAINTENANCE OF THE APPLIANCE
Cleaning
ATTENTION! Before doing any cleaning, make sure that the appliance is disconnected from
the electric mains and that the gas cutoff valve is closed. During cleaning operations, avoid
using direct or high pressure sprays of water on the appliance. Cleaning must be done when
the appliance is cold.
The parts in steel can be cleaned with warm water and neutral detergent, using a cloth; the detergent
must be suitable for cleaning stainless steel and must not contain abrasive or corrosive substances.
Do not use common steel wool or anything similar which, depositing iron particles, could cause rust
from it. It is also better to avoid using sandpaper or emery paper. Only in the event of encrusted dirt,
pumice stone in powder may be used but an abrasive synthetic sponge or stainless steel wool would
be preferable, to be used in the direction of the grain. After washing, dry with a soft cloth.
If the appliance is out of use for a long time, it is advisable to turn off the gas tap. Then disconnect
the main electricity supply and wipe all stainless steel surfaces with a cloth soaked in vaseline oil in
order to give it a protective film and air the rooms now and again.
Maintenance
ATTENTION! Before doing any kind of maintenance or repairs, make sure that the
appliance is disconnected from the electric mains and that the gas cutoff valve is closed.
The following maintenance operations must be carried out at least once a year by specialized
personnel. It is advisable to have a maintenance contract.
• Check for correct functioning of all control and safety devices;
• Check for correct ignition of burners and proper functioning at minimum;
• Check the tightness of the gas pipes;
• Check the condition of the power cable;
• Clean the outlet pipes of type "B" appliances, following the prescriptions in force in the country
of installation;
• The gas tap should be lubricated but this is a difficult operation and not very reliable; therefore
it is advisable to substitute it;
Pag. 30

Werbung

loading

Diese Anleitung auch für:

296.305295.3011296.310295.3051