Chauvet Professional MAVERICKMK2WASH Bedienungsanleitung Seite 48

Calibrated White
To set the white mode:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Calibrated White, or touch the display where it says Calibrated
White.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select ON (uses the factory-calibrated white
balance), OFF (uses the maximum white values), or Custom (uses the custom white values
defined under White
5. Press <ENTER>.
White Balance
To set the custom white balance:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select White Balance, or touch the display where it says White
Balance.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or White,
or touch the display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the color value with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value from 000–255.
7. Press <ENTER>.
8. Repeat steps 4–7 until the color balance is set as desired.
Color balance
To set the maximum values of a given color in the mix, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Color Balance, or touch the display where it says Color
Balance.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or White,
or touch the display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the color value with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value from 100–255.
7. Press <ENTER>.
8. Repeat steps 4–7 until the color balance is set as desired.
Preset select
This option saves three different preset menu option configurations. To record and set these presets, follow
the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are saved to
PRESET A without having to do anything.
• To create a new preset, highlight and select PRESET SELECT. Highlight PRESET B or
PRESET C and press <ENTER>. When you make that selection, the product will reset
automatically. Go back and make the changes you need to make in the menu. This will
automatically save to the preset you are in.
Page 33 of 197
main level.
Balance), or touch the display where it says the desired option.
menu.
menu.
menu.
Maverick MK2 Wash User Manual Rev. 15
Operation