Gelhard GTV2292 Bedienungsanleitung Seite 76

SATELLITE SETTINGS
2. Navigate to "General" and press the ► button. Now select "Programmes" and press the OK button.
3. Now select the "Programme Tuning & Settings" menu item and press the OK button.
4. You are now in the "Programme Tuning" menu. Select "Satellite settings" and press the OK button.
5. You can now add another satellite or adjust the settings for the current satellite.
6. Navigate to the satellite you want to set or to Add satellite and press the OK button.
7. The following setting options are available.
8. Note that if a new satellite has been added or the settings have been changed, a new search must be
performed.
Add Satellite
Customise satellite
settings
QUICK MENU
1. Press the configuration button to open the "Quick menu".
2. Here you have access to the following menu items.
Main menu
(gear symbol)
Select this menu item
and press the OK button
to access the "Main
menu".
Navigate to "Add satellite" and press the OK button. Select the satellite you want
to add and press the OK button. Please note that this setting can only be used if
you have a multi-switch that combines the satellites on one satellite line. The TV
set only has one satellite connection. Note the settings for the multi-switch that
must be made in the satellite settings.
Satellite: Select the satellite. The default is Astra 19.2E
LNB frequency: Select the LNB frequency based on your LNB. The default is
9750/10600.
Transponder: The transponder frequencies for the corresponding satellite are
displayed here.
22 kHz Tone: This option is related to the "LNB frequency" and cannot be
changed for all LNB frequencies.
LNB Power: Activate or deactivate the LNB power depending on the selection of
the multiswitch or LNB. The option is switched on by default.
DiSEqC: Set the DiSEqC setting using the multiswitch. The option is switched off
by default.
Unicable: Activate or deactivate the "Unicable" menu item depending on the
selection of the LNB or multi-switch. The setting is switched off in the default
setting. If the option is switched on, you have access to the "Unicable settings".
Unicable Settings: Select the Unicable settings based on the LNB or multiswitch.
The following options are available: Unicable type, satellite position, range
number and range frequency.
Motor Type: Set the setting based on the motor. For self-aligning antennas,
please set this option to "Off".
Motor Settings: In this menu item, you set parameters for the alignment of the
motor. The following options are available: Test transponder, Direction of
movement, Movement mode, Set limit and Restrict direction.
Accessibility
(human symbol)
Select this menu item
and press the OK button
to go directly to the
"Accessibility menu".
Internet connection
(receive symbol)
Select this menu item
and press the OK button
to go directly to the
"Internet connection
menu".
76
UK
Edit mode
(pencil symbol)
Select this menu item
and press the OK button
to customise the layout
of the quick selection
menu.