Configuration; Configuring Consoles; Adjusting The Time Between Automatic Switchings - G&D DVIMUX8-OSD-PS/2 Bedienungs Und Installationsanleitung Handbuch

Configuration

Configuration

Configuring consoles

Any user can view and edit the console configuration settings by using the
Setup menu.
IMPORTANT: Only the Supervisor and users with active configuration rights can
change the
Scancode Set
The following settings are active in the default settings of the KVM switch:

Adjusting the time between automatic switchings

In the default configuration, the Autoscan or Autoskip function accesses a new com-
puter every five seconds (see page 13 ff.).
The time span between switchings can be between 2 and 60 seconds.
How to adjust the time span between automatic switchings:
1. Press Ctrl+Num
2. Press F1 to open the menu.
3. Use the Arrow keys
4. Use the
Arrow keys
5. Use the
Numeric keys
6. Press to save your settings.
F1
31 · G&D DVIMUX8-OSD-PS/2
.
CONSOLE SETUP
Autoscan Time:
Keyboard Layout:
Screensaver:
Auto Logout:
Console Name:
Show Display:
Display Position
Menu Position
Scancode Set:
OSD Transparency:
OSD by Mouse:
Stepkeys:
Broadcast:
Esc
(standard) to open the On-Screen Display.
to select Console Setup
to select
Autoscan Time
to enter the value and press
DVIMUX8
German
DVIMUX8
Up Dwn
Enter F1:Save
and press Enter
.
Enter
5 Sec
Off
Off
Temp
...
...
2
Off
No
Off
.
.
Console