Accessing Computers Manually (Stepscan) - G&D DVIMUX8-OSD-PS/2 Bedienungs Und Installationsanleitung Handbuch

Getting started

Accessing computers manually (Stepscan)

After you enable the Stepscan mode, press a key to access the previous or next computer.
After each switching, an information display at the moni-
tor shows the name of the active computer, the name of
the KVM switch and the information
How to start the Stepscan process:
1. Press Ctrl+Num
2. Press the F1 key to open the menu.
3. Use the Arrow keys
How to access the previous or the next computer:
1. If the Stepscan function is active, press
switch to the previous computer.
NOTE: If you changed the step keys, proceed as described in the paragraph
Defining select keys on page 29 to find out the current settings.
How to stop the Stepscan process:
1. Press
Ctrl+Num
tion to switch the channel.
15 · G&D DVIMUX8-OSD-PS/2
(Standard) to open the On-Screen Display.
to choose Stepscan
(standard) to open the On-Screen Display or use a key combina-
.
STEP
, and press Enter .
Arrow to switch to the next or
CPU 1
DVIMUX8
STEP
Arrow to