Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Attaching the Wall-Mount
Bracket to the Dry Wall with Studs
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV and is capable of supporting a
weight of at least four times that of the TV.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on
page 21.
• Refer to your TV's Reference Guide for the
TV's weight.
Note
When your TV is installed on the wall, the upper
side of the TV slightly leans forward.
We recommend you to check the position of TV in
the viewing environment.
WM1
2
3
Align
WM1
four marks aligned with the
studs.
× 4
Note
Use a level to check whether
4
Drill upper pilot holes on the
marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV.
Note
Pilot holes must be drilled to a depth of 75 mm,
using a 5.5 mm diameter drill bit.
− 8 (EN) −
to the wall and make
WM1
is level.
× 2
ø 5.5 mm
75 mm
WM1
Werbung
