5
Install
on the wall using
WM1
suitable screws (not supplied)
and washers (not supplied).
× 4
Note
Use a level to check whether
Precaution
Do not over-tighten wooden screw 8 mm × 60 mm.
Improper tightening could reduce the holding
power of wooden screw 8 mm × 60 mm.
6
Pull out the arm of the bracket to
the end.
Preparing for the Installation
of the TV
Note
Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
WM1
8 mm × 60 mm
WM1
is level.
− 15 (EN) −
Installing the TV to the Wall from
Carton*
1
*1 Only for limited region/country/model.
1
Remove the screws from the rear
of the TV.
2
Select wall mounting style as
shown below.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on
page 21.
WARNING
When slim mounting is selected, rear terminal
access is limited.
Standard mounting
26 mm
If standard mounting is selected:
Attach the spacer
WM6
desired gap between the TV and the Wall.
WM6
WM2
M3
If slim mounting is selected:
WM2
Slim mounting
13 mm
to
WM2
for the
EN