KKT KOLBE HERMES HC Benutzerhandbuch Seite 63

• For using the hood in exhaust mode,
attach the exhaust hose to the cooker
hood.
• Raise the hood body and attach it to
the wall bracket.
• From the inside of the cooker hood,
mark the positions of the holes in its
back on the wall.
(For this step, open the front flap
of the hood and remove the metal
grease filter).
• Take the hood down, drill holes
at the marked points according to the
diameter of the dowels and carefully
tap one of the other dowels into each
of the drill holes with a hammer.
• Then carefully tap a dowel into each
of the holes with a hammer and fasten
the bracket to them with the screws
provided (4 × 30 mm).
Mounting the hood
63