Warranty - ACME CrossWave Benutzerhandbuch

zoopa CrossWave FPV Racer spares and accessories
Please note that only original parts grant full functionality and warranty.
CamOne FPV videocameras and accessories
Art. No.
FCHD77 CamOne FPV-Screen Stratos 7" 5.8GHz Diversity Screen "ABF"
FCHD78 CamOne FPV-Screen Stratos+ Movie 7" DVR 5.8GHz Diversity Screen "ABF"
FCHD78-B CamOne Stratos+ replacement battery 1800mAh
CamOne FPV-Screen Stratos+ 7" 5.8GHz Diversity Screen "ABF"
FCHD79
high resolution
CamOne FPV-Screen Stratos+ Mega 9" 5.8GHz Diversity Screen "ABF"
FCHD98
high resolution
FCHD91 CamOne Video Transmitter 5.8GHz 25mW
FCHD95 CamOne Video Transmitter 5.8GHz 1500mW >>not allowed in the EU<<
PNX058-F Phoenix CPL Antenna Set 5.8GHz Black
FAQ
Problem
The controller does not react to any
commands
The controller immediately
undervoltage after activation
The motors do not react at fully charged
battery
The quadrocopter shows undervoltage
The quadrocopter does not gain height

Warranty

The consumer is without prejudice to any claim against the seller granted a guarantee to the following
conditions:
» New devices and their components exhibiting defects within 24 months from the purchase due to
manufacturing and / or material faults, are ACME the game company at its option, reflecting the
current state of the art exchanged or repaired free device. For wear parts
(eg batteries, motors, etc.), his warranty is valid or 3 months from purchase.
» This warranty does not apply if the device defect is due to improper treatment and / or failure to
comply with these instructions.
» This warranty does not extend to self- paid by the customer services.
» Warranty claims are to make immediate payment of the Guarantee case.
» Ownership of devices or components that are returned to ACME the game company as part of the
Product
• Check the controller batteries
• Check the polarity of the batteries
• On/Off switch activated?
shows • Replace the batteries
• Use high- quality Alcaline batteries
•The control sticks are mechanically blocked and do not
reach the end positions in the corner/center
•Check the batteries voltage. It has to be at least 12V in
total.
•Check each cell with a LiPo tester
• Propellers are not mounted correctly or inverted
•The battery is not fully charged
• The mounted propellers do not match to the quadrocopter
If still no solution, please contact our service!
29
Solution
EAN-Code
4260033042699
4260033042910
4260033043078
4260033042927
4260033042934
4260033047496
4260033043054
4260033045362