ACME CrossWave Benutzerhandbuch Seite 27

Start
To start the motors, slowly pull down the left stick into the right corner. The motors will run now.
Now slowly pull up the left stick and the model will take off.
For details on how to control the model in the air, please check the section „Controls".
Landing
To land the model, bring into a horizontal and stable flight attitude, approx. 1 meter above the landing site.
This shall be plain. Carefully pull down the left stick (Gas) until the model has landed.
Keep the stick down and move it into the left corner until the motors have stopped working.
Put away the controller without switching off and disconnect the LiPo battery from the model. You can now
switch off the controller!
Video-/FPV features
The model is equipped with a Video-/FPV (First Person View) feature, which consists of a videocamera with
tilt control, a 5.8 GHz video transmitter and a CPL-antenna.
For viewing the live-video, you require a 5.8GHz FPV- Screen or video goggles (not included).
The camera does not save the video.
27