ADM Messtechnik OCM160 Betriebsanleitung Seite 70

Orbit Controls AG
Description:
This command allows to change port number. Interface must be restarted to take effect
(see SYST:COMM:REST command).
Parameters:
<DNPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:PORT 23
SYST:COMM:LAN:PORT? Response: 23
:SYSTem:COMMunicate:LAN:HOST
Syntax:
:SYSTem:COMMunicate:LAN:HOST <CPD>
:SYSTem:COMMunicate:LAN:HOST?
Description:
This command allows to change host name if DHCP is switched on. Interface must be
restarted to take effect (see SYST:COMM:REST command).
Parameters:
<CPD>
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:HOST OCM160_SNXXXXXX
SYST:COMM:LAN:HOST? Response: OCM160_SNXXXXXX
:SYSTem:COMMunicate:LAN:DHCP
Syntax:
:SYSTem:COMMunicate:LAN:DHCP <BOOL>
:SYSTem:COMMunicate:LAN:DHCP?
Description:
This command allows switch On/Off DHCP.
Parameters:
<BOOL>
·ON
·OFF
·1
·0
Remarks:
Overlapped command
Value is not affected by reset
Example:
SYST:COMM:LAN:DHCP ON
SYST:COMM:LAN:DHCP? Response: 1
:SYSTem:COMMunicate:RESTart
Syntax:
:SYSTem:COMMunicate:RESTart
Betriebsanleitung
Range 0 ... 9999 (default 23)
Upper alpha, lower alpha, digits, underscores and spaces are
allowable. Maximum string size is 14 characters.
{ON|OFF|1|0} (default 1)
DHCP is On
DHCP is Off
same as ON
same as OFF
OCM160 DC-Prozesskalibrator
70