Snmp - Abus TVIP41550 Bedienungsanleitung

"Enable HTTPS secure connection" You can choose between unencrypted (HTTP) + encrypted (HTTPS)
access or encrypted (HTTPS) access only.
If a secure HTTPS connection is enabled, the video server can be accessed using the
following lines:
https:\\"IP-Adresse"
If you wish to stream using the HTTPS connection, use the following link:
https:\\"IP-Adresse":"HTTPS-Port\Live.sdp
Creating and installing a certificate
"Create self-signed certificate automatically" The pre-defined certificate in the video server is used. With
this option, no settings can be made by users.
"Create self-signed certificate manually" A new certificate is generated. Specific data must be entered.
"Create certificate request and install" Select this option if you wish to generate a certificate request
which is then submitted to a certificate authority. A certificate issued by a recognised certification authority
(e.g. VeriSign) can also be installed on the video server.
Note: When using a "self-signed certificate", you may receive a warning message from your
browser. Self-signed certificates are always classed as insecure by the browser as the source
certificate and authorisation of the certification authority are both absent.

6.4 SNMP

The Simple Network Management Protocol is a network protocol that can be used to monitor and control
network devices (e.g. routers, servers, switches, printers, computers etc.) from a central station. Here, the
Protocol controls the communication between the monitored devices and the monitoring station. Enable this
function if you are using an SNMP management server in your network. You can also access software
solutions that can be installed on your PC system.
"Enable SNMPv1, SNMPv2c" Depending on your SNMP server settings, you can define the name fields of
the read/write community here.
79
English