Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9 Electrical connection
• Only operate the appliance with alternating current (AC).
• The permissible voltage and frequency are indicated on the type plate. The position of the
type plate is shown in the section entitled Description of the appliance.
• The socket must be properly earthed and protected by a fuse.
• The tripping current of the fuse must be between 10 A and 16 A.
• The socket must not be situated behind the appliance and must be easily accessible!
• Do not connect the appliance using an extension cable or extension socket.
• Do not use stand-alone inverters (conversion of direct current to alternating/three-phase
current) or energy-saving plugs. Risk of damage to the electronic control system!
10 Operating and control elements
Any function can be activated by touching the corresponding button.
On/Off button (switching the appliance on and off)
‚ ƒ
Temperature setting buttons upper compartment
„
Upper compartment temperature display
…
Lower compartment temperature display
† ‡
Temperature setting buttons lower compartment
ˆ
Interior light On/Off button,
"C/F" switch for temperature display in "Celsius" or "Fahrenheit"
11 Switching the appliance on and off
Switching the appliance on
Press button
until the temperature display lights up.
Switching the appliance off
Keep button
pressed for approx. 3 seconds so that the temperature display goes out.
12 Setting the temperature
The temperature of both compartments can be set separately.
„
Temperature can be set at between +10 °C and +20 °C
…
Temperature can be set at between +5 °C and +12 °C
17
Werbung
