Rizzoli ZVI Gebrauchsanweisung Seite 48

4.8 GLASS CLEANING
The glass of the fire door might be dirtied by soot. In case of bad combustion, bad draught or in presence of low quality wood, the glass could become more
dirty. The glasses of the fire door and of the combustion chamber, can be cleaned with normal specific products you can find in commerce. The internal
part of the combustion chamber door is designed to clean itself during the use of the cooker. Anyway, sometimes you could have the need to clean also the
glass in touch with the flame of combustion.
WARNING! Do not clean the glass before waiting for its cooling. Suddenly changes in temperature may cause breakings in the glass.
4.9 PLATE CLEANING AND MAINTENANCE
Radiating plates in special steel need regular maintenance, in particular they need cleaning after every use that brings moisture or dust on the plate itself.
With cold cooker you have to remove all the pots and boilers that could maintain moisture on the plate.
Together with the device are given some exclusive products, studied for the cleaning and the maintenance of the plate: the abrasive sponge, the plate clean-
er and the oil for plate care. On how to use them please read the instructions written on the bottles.
The plates are all worked in with non acid anti-corrosion oil. The use of the cooker deletes this oil layer and so the contact with water may cause small rusty
stains. In this case you have to wipe the plate with a rag with the plate cleaner given together with the device. If the rusty stain is not being cleaned, you
could have to wipe the plate with the abrasive sponge or with a lightly abrasive paper. To restore the protecting layer wipe the plate with little oil for plate
care. In any case, cleaning with water must be avoided.
It is important to be sure that the expansion cuts and the hole between the plate and the frame are not obstructed by dust or by other residuals: the plate
could suffer deformations, also permanent. When it is necessary, you should clean also the beating of the circled removing eventual residuals. Radiating
steel plates, exposed to continuous heating, trend slowly to take a burnished colour; if you want to accelerate the process, repeat frequently the wiping
with oil for plate care.
When the cooker has not been used for a long time it is suggested to treat the plate with the oil for plate care, in this way the plate is protected against
moisture in the best way.
To remove the plate, you have to lift it up. When you reinsert the plate, keep in mind to leave the 1 or 2 millimetres to allow the thermal expansion of the
plate itself.
4.10 MAINTENANCE OF THE LIGHT
WARNING! Before starting any maintenance operation for the light, you must disconnect it from AC power and be sure that the cooker is not
powered. Verify also if the cooker is cold and if the light was turned on in the previous minutes.
Oven lamp suffers high temperatures. Even if it is designed to work in these conditions, it could become out of order. You have to replace it with a lamp with
the same features (halogen lamp 25W 230V 300° connection G9). To replace the lamp you have to unscrew the lamp cover, remove the lamp, insert the
new lamp and finally screw in the lamp cover. Seldom, it is necessary to clean the glass of the lamp cover. To make this, you have to unscrew the lamp cover,
remove the external residuals due to the cooking steams, wash the lamp cover and once it is dry you can screw it in its place.
Picture 27 - Take-down the oven lamp.
4.11 THERMIC DILATATION
During the use all the materials of the cooker are subjected to dilatation and light moving due to the temperature variations. This phenomenon must not be
prevented otherwise deformations and breakings may occur. For this reason, the spaces that allow the dilatation both internal and external of the cooker
must be kept free and clean.
4.12 EXTRAORDINARY MAINTENANCE
Most of the cooker's parts are easy to remove with a simple screwdriver, eventual repairs or modifies will be faster if the concerned piece, directly or by a
dealer is sent to our factory. If you need accessories or spare parts, please tell us the the serial number of the cooker indicated in the green booklet given
together with the wood fired cooker. The serial number is also indicated on a plate placed on the side of the wood box.
48