Switching The Hands-Free Appliance On And Off; Coupling The Hands-Free Appliance With A Mobile Telephone - Silvercrest IAN 279754 Bedienungsanleitung

Switching the hands-free
appliance on and off
Switching on: The appliance is switched off.
Press and hold the multi-function button
onds, until a short and high signal tone is heard. The
LED status indicator
Note:
The hands-free set switches on automatically as soon as it
is connected to a power supply.
Switching off: The appliance is in standby mode.
Press and hold the multi-function button
until a long and deep signal tone is heard. The LED
status indicator
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the Bluetooth
"Handsfree (HFP) and Headset (HSP)". Further informa-
tion about Bluetooth
in the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
Check to make sure the mobile telephone is switched on.
Programme the mobile telephone so that it searches
for Bluetooth
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
Ensure that the hands-free appliance is correctly set up
and switched off.
To switch the device off, press and hold the multi-function
button
tone will be heard and the LED status indicator
extinguishes.
│
■ 54
GB
blinks twice every 3 seconds.
extinguishes.
radio technology is to be found
®
appliances. A detailed description of
®
for about 5 seconds. A long, low signal
for 3 sec-
for 5 seconds,
Profile
®
SBTF 10 C3