EUROM Flow 250 Bedienungsanleitung Seite 19

This pump is not suitable for continuous use, such as the continual circulation of water.
This type of use will substantially shorten the pump's life expectancy.
Description
Before use
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your
vendor for inspection or replacement.
Hose connection
Screw the curved fitting (supplied) to the pump, with the opening upwards, as in the
above photo. Now connect the hose connector to the fitting.
The hose connector narrows from 25 to 38 mm (or 1" to 1½"). If you are exclusively using
a 32 mm hose, you can remove the remaining piece of the fitting with a saw. Attach the
hose to the appropriate part of the connector with a hose clamp. The best results of
pumping efficiency are achieved with hose, as thick as possible.
19