Skandika Fitness SF-1900 Aufbau- Und Bedienungsanleitung Seite 32

Error messages
"---- " " ----" means, that the contact to the handpulse sensors was not sufficiently for a measure-
ment. The reason for this can be that you have not grasped the two sensors correctly. Start a new mea-
surement with correctly placed hands!
"E-1" means, that no heart rate signal has been detected.
"E-4" appears, if the fat % or BMI values are too low (<5) or too high (> 50).
Notes:
1) This computer has an automatic on/off function so that it switches on when the pedals move or when
any button is pressed, and turns into stand-by mode automatically if no signal has been received for
approx. 4 minutes.
2) In case of any abnormal functions, disconnect the device from power source and reconnect after some
minutes
32
Fig. 21
Fig. 23
Fig. 25
Fig. 22
Fig. 24