Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
- STEAM LEVEL
After selecting the EASY IRON PLUS
programme, you can use this button to
choose between three steam treatments of
different intensities, designed for dry or wet
garments and depending on the type of
fabric:
- COTTON (default selection)
This programme is used for cotton
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- SYNTHETIC (press button once)
This programme is used for synthetic
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- DELICATES (press button twice)
With the help of steam, the cycle
refreshes
and
garments after use. The programme
consists of an initial phase in which the
steam acts and a final phase in which the
excess humidity is removed for immediate
use. The cycle is suitable for dry fabrics.
These options must be selected before
pressing the START/PAUSE button.
*
STEAM LEVEL
(only available on certain models)
SPECIAL PROGRAMMES button
(Only available on certain models)
This button allows you to choose between
three different options (available for some
programmes only):
- SINGLE ITEM
This option (which can be set in several
programs)
optimizes
energy consumption of the selected
relaxes
creases
the
water
and
program,
maintaining
performance unchanged.
SINGLE ITEM is designed for reduced
loads and lightly soiled garments, aiming
to limit the unnecessary waste.
- NIGHT WASH
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
During the drum water retention phase,
the machine is in pause mode.
Press START to end the cycle with the
spin (which can be reduced or removed
with the specific button) and drain phase.
Thanks to electronic control, the water in
the intermediate phases is
silently, making this option very useful for
in
washing at night.
- DRUM CLEAN
Developed to clean the washing machine
drum.
Use only powder detergent.
Do not start the programme with laundry
in the washing machine.
It is suggested that this is carried out after
every 50 washing cycles.
The option can only be selected for the
DRAIN & SPIN programme.
These
options
before pressing the START/PAUSE
button.
If an option is selected that is not
compatible
programme then the option indicator
light first flashes and then goes off.
71
the
washing
emptied
must
be
selected
with
the
selected
Werbung
