Mounting The Wall Bracket; Securing The Data Logger - testo 175 Bedienungsanleitung

7.4. Mounting the wall bracket

The scope of delivery does not include mounting
materials (e.g. screws, wall plugs).
✓ The data logger has been removed from the wall
bracket.
1. Position the wall bracket at the desired place.
2. Use a pen or something similar to mark the location for
the fastening screws.
3. Prepare the fastening location in accordance with the
fastening material (e.g. drill hole, insert wall plugs).
4. Fasten the wall bracket with suitable screws.
Pos: 36 /TD/Erste Schritte/testo 175/Datenlogger sichern @ 6\mod_1275475596653_79.doc @ 62341 @

7.5. Securing the data logger

✓ The wall bracket has been mounted.
1. Slide the data logger into the wall bracket (1).
2. Push the locking pin (2) through the holes in the wall
bracket.
3. Fasten the lock (3) on the locking pin.
4. Pull off the key (4).
Pos: 37 /TD/Produkt verwenden/testo 175/Daten auslesen @ 6\mod_1275468888668_79.doc @ 62084 @
7 Using the product
51