Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLESHOOTING
• If you are unable to get the NetWorks+ radio to connect to your WiFi network and you have a
PC, confirm your PC can connect to your WiFi network to verify it is operational.
• Check that your network doesn't restrict connections to particular MAC addresses. View the
"NetWorks+" MAC address in the main menu under "Info", shown as "Radio ID".
• Check that a DHCP server is available, or that you configured a static IP address on the Net-
Works+. You can configure a static IP address on the NetWorks+ in the main menu under "IR
Set Up".
• Check that your network's firewall isn't blocking any outgoing ports.
• If using an Ethernet cable, be sure the cable is fully inserted into the NetWorks+ Ethernet jack
and you've selected "Wired" under "Manual settings" in "Internet Setup".
• In the rare event you encounter an operational problem, unplug the NetWorks+ for a few sec-
onds and plug it back in. If this fails to cure the problem, try the factory re-set.
19 – ENGLISH
Werbung
