Olimpia splendid Bi2 WALL AR 1000 Gebrauchs-, Wartungs- Und Installationsanleitung Seite 31

0.3 - GENERAL WARNINGS
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS MUST
ALWAYS BE FOLLOWED IN ORDER TO REDUCE RISKS OF FIRE, ELECTRIC
SHOCKS AND INJURY, INCLUDING THE FOLLOWING:
1. This document is restricted in use to the terms of the law and may not be copied
or transferred to third parties without the express authorization of the manufacturer,
OLIMPIA SPLENDID.
Our machines are subject to change and some parts may appear different from the
ones shown here, without this affecting the text of the manual in any way.
2. Read this manual carefully before performing any operation (installation,
maintenance, use) and follow the instructions contained in each chapter.
3. Follow these instructions carefully to prevent material damage and injury to the
operator or other persons. Incorrect use due to failure to respect the instructions
can cause injury or damage.
4. Keep the manual carefully for future reference.
5. After removing the packaging, check that the appliance is in perfect condition.
The packaging materials must not be left within reach of children as they can be
dangerous.
6. THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO PERSONS
OR PROPERTY CAUSED BY FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS
MANUAL.
7. The manufacturer reserves the right to make any changes it deems advisable to its
models, although the essential features described in this manual remain the same.
8. Failing to comply with the instructions contained in this manual, and using the unit
with temperatures exceeding the permissible temperature range will invalidate the
warranty.
9. Routine maintenance of the filters and general external cleaning can be done by
the user as these operations are not difficult or dangerous.
10. During assembly and at each maintenance operation, it is necessary to respect
the precautions indicated in this manual and on the labels located inside or on the
appliance, as well as to take all the precautions suggested by common sense and
by the Safety Regulations in force in the country of installation.
0.4 - IMPORTANT SAFETY INFORMATION
The safety precautions listed are divided into two categories. In either case,
important safety information is listed which must be read carefully.
WARNING
Failure to observe a warning may result in death.
WARNING
Failure to observe a caution may result in injury or damage to the equipment.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
1. Be sure only trained and qualified service personnel to install, repair or service the
equipment.
Improper installation, repair, and maintenance may result in electric shocks, short-
circuit, leaks, fire or other damage to the equipment.
2. Install according to this installation instructions strictly.
If installation is defective, it will cause water leakage, electrical shock and fire.
3. When installing the unit in a small room, take measures against to keep refrigerant
concentration from exceeding allowable safety limits in the event of refrigerant
leakage. Contact the place of purchase for more information. Excessive refrigerant
in a closed ambient can lead to oxygen deficiency.
Bi2 WALL AR 1000 - 1200 - 1400
EN - 3