HOLZMANN-MASCHINEN HOB305PROSMW2 230V HOB305PROSMW2 400V Betriebsanleitung Seite 37

Verfügbare Sprachen

15.6

Electrical connection

Dangerous electrical voltage!

 The machine may only be connected to the power supply and the associated

checks carried out by a qualified electrician or under the instruction and

supervision of a qualified electrician!

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at

• Slide the planer fence (1) with the fixture

onto the bracket

NOTE:

First loosen screw (3) and remove end

plate (4) of the bracket. After mounting the

planer fence, fix the end plate again.

• Fix the planer fence in desired position with

clamping levers (5)

4. Assembly rear protective cover

• Fix the rear protective cover (1) to the

holding rail of the planer fence using

screws (2) as shown

5. Assembly arm planer knife cover

• Push the arm planer knife cover (1) onto the

bracket (2) on the exit planer table (3) and

fix it with the clamping lever arm planer

knife cover (4)

6. Assembly planer knife cover

• Insert planer knife cover (1) into the holder

(2) and fix it in desired position with the

fixing knop (3)

WARNING

HOB305PROSMW2_230V | HOB305PROSMW2_400V

ASSEMBLY