Xiaomi G10 Plus Benutzerhandbuch Seite 29

Error Icon
If the vacuum cleaner is not working properly, the screen display will show an error message. Please refer to the table below to find your solution based on the error
message.
Error Icon Error Message
Airway Blocked
Roller Brush Stuck
High-temperature Alert
Filter Not Installed
If one of the error codes from E0 to E4 appears on the display, please contact the after-sales service team for repair.
Solution
Check if any blockages caught in the dust compartment, extension rod, and/or high torque brush bar.
Refer to "Cleaning the High Torque Brush Bar" in the Care & Maintenance section for directions on
how to remove hair and other debris caught in the roller brush.
Wait until the battery temperature normalizes before resuming use.
Ensure that the filter and pre-filter are installed correctly.
26