WAGNER PlastCoat HP 30 Originalbetriebsanleitung Seite 28

GB
TABLE OF CONTENTS
Table of Contents
1 SAFETY REGULATIONS ______________________ 29
2 INTRODUCTION TO WORKING WITH
PLASTCOAT HP 30 ___________________________ 31
2.1 Function of the PlastCoat HP 30 _________________ 31
2.2 Processible coating materials ___________________ 31
3 TECHNICAL DATA ___________________________ 31
4 EXPLANATORY DIAGRAM FOR PLASTCOAT HP30 32
4.1 Operating elements and displays on device _______ 33
4.2 Drive _______________________________________ 33
5 TRANSPORTATION __________________________ 34
5.1 Moving _____________________________________ 34
5.2 Transport using a crane (fig. 4) __________________ 34
5.3 Transportation in vehicle ______________________ 34
6 COMMISSIONING ___________________________ 34
6.1 Installation location ___________________________ 34
6.1.1 Connection to mains power supply/ Extension cable 34
6.2 Initial starting-up _____________________________ 34
6.2.1 Scope of supply ______________________________ 34
6.3 Preparing the machine ________________________ 34
6.4 Beginning of the spraying process _______________ 36
6.5 Interruptions of work / Breaks __________________ 36
6.6 End of the spraying process / End of work _________ 36
7 GENERAL INFORMATION ABOUT THE
APPLICATION TECHNIQUE ___________________ 37
7.1 Spraying technique ___________________________ 37
8 SHUTTING DOWN AND CLEANING ____________ 37
9 MAINTENANCE _____________________________ 38
9.1 Mechanical maintenance ______________________ 38
9.2 Electrical maintenance ________________________ 38
9.3 Long periods of non-usage _____________________ 38
9.4 Replace the stator and rotor ____________________ 39
9.5 Shaft seal ___________________________________ 40
10 ELIMINATING FAULTS ________________________ 41
11 SPARE PARTS LIST FOR PLASTCOAT HP30 ______ 44
11.1 Spare parts list frame _________________________ 45
12 PLASTCOAT HP30 ACCESSORIES ______________ 46
28
Testing of the mortar spraying machine _______________ 48
Note on disposal __________________________________ 48
Important information on product liability_____________ 48
Guarantee declaration _____________________________ 48
CE declaration of conformity ________________________ 49
European service network _________________________ 100
Plast Coat HP 30