Zhermack VIBRATOR A11 Bedienungsanleitung Seite 97

MAINTENANCE AND USE MANUAL
The equipment described in this manual has an ID platelet giving information about both the
equipment and the manufacturer :
A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
C306201 - VIBRATOR A12
D
The VIBRATOR A11 and A12 have been built in compliance with the EC directives listed in the
enclosed "EC decoration of conformity". When requesting spare parts, information or
assistance from your Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or the damage the plate as you must be able to read the data at
all times.
On the back of the equipment there is a label. Please follow the symbols as indicated:
ATTENZIONE! DANGER OF AN ELECTRICAL CURRENT. DO NOT OPEN DOORS OR
REMOVE PROTECTION BEFORE YOU HAVE DISCONNECTED THE PLUG FROM THE
ELECTRICAL SOURCE
VIBRATOR A11/A12
EN
SN:20000000
230V~50/60Hz 350W
DATA FOR THE IDENTIFICATION
A. Name and address of manufacturer
B. Equipment code and model
C. Serial number
D. Power supply information
C
Danger signs on the equipment
3.4
3.4.1
97 of 176