Toro Recycler 20961 Bedienungsanleitung Seite 6

Figure 3
1. Handle lock engaged
position
3. Set the handle lock in 1 of the 2 positions
until the pin clicks in place to lock the handle into the
operating position.
Figure 4
1. Handle lock
g188439
2. Handle lock disengaged
positions
(Figure 4)
g185991
2. Pin positions
2
Installing the Recoil-starter
Rope in the Rope Guide
No Parts Required
Procedure
Important: To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Hold the blade-control bar to the upper handle and pull the
recoil-starter rope through the rope guide on the handle
(Figure 5).
1. Recoil-starter rope
3
Filling the Engine with Oil
No Parts Required
Procedure
Important: Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
Engine oil capacity: 0.47 L (16 fl oz)
Oil viscosity: SAE 30 or SAE 10W-30 detergent oil
API service classification: SJ or higher
1. Move the machine to a level surface.
2. Remove the dipstick by rotating the cap
counterclockwise and pulling it out
5
Figure 5
2. Rope guide
(Figure 6).
g003251