Curve Tracer Hm6042; Specifications - Hameg HM 6042 Handbuch

Curve Tracer HM6042

Valid at 23 °C after a 30 minute warm-up period
Measurement ranges
3 voltage ranges: collector/drain voltages
≤ 2 V, 10 V, 40 V ±5 %
3 current ranges: collector/drain currents
≤ 2 mA, 20 mA, 200 mA ±5 %
output power ≤ 0.04 W, 0.4 W, 4W ±10 %
3 power ranges:
Basis/gate voltages and currents:
I 1 µA to 10 mA
B
V to 2 V ±5 %
B
V to 10 V ±5 %
G
Measurement accuracy
Measurement accuracy of static values:
V ± (2 % of rdg. + 3 digits)
C/D
I ± (2 % of rdg. + 3 digits)
C/D
I ± (2 % of rdg. + 3 digits)
B
V ± (2 % of rdg. + 3 digits)
B
V ± (3 % of rdg. + 3 digits)
G
β
to 1000: ± (5 % of rdg. + 3 digits)
to 100000: ± [(6 + 0,001 x β)%of rdg. +3 digits]
Measurement accuracy of dynamic values:
≤ 1000 Ω ± (12 % of rdg. + 3 digits)
h11
≥ 1000 Ω ± [(12 + 0.001 Mw.)% of rdg. +3 digits]
≤ 1000 ± (12 % of rdg. + 3 digits)
h21
≥ 1000 ± [(12 + 0.001 Mw.)% of rdg. +3 digits]
≤ 1 S ± (12 % of rdg. + 3 digits)
y21
≤ 1 S ± (12 % of rdg. + 3 digits)
h/y22
Other Functions
Storing of a reference measurement value, e.g. for support in component
selection
Cursor measurement functions:
single mode: One cursor marks the position on the
measurement reading display.
tracking mode: Two cursors mark the positions at which
the readings for the dynamic values
were taken.
w w w . h a m e g . c o m
HM6042E/310505/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · info@hameg.com
Analysis of curves for:
Display:
Miscellaneous
CRT:
Acceleration voltage:
Trace rotation:
Power supply:
Power consumption:
Operating temperature:
Safety class:
Color:
Dimensions (W x H x D):
Weight:
Values indicated without tolerances are intended as aids to orientation and
reflect the characteristics of an average device.
Reference temperature 23° C ± 2° C.
Subject to change without notice.
Accessories supplied: Operator's Manual, power cable, plug-in test adapter
A Rohde & Schwarz Company
diodes, zener diodes
NPN/PNP transistors
FET/MOS-FET (N/P channel)
thyristors (to a limited extent only)
LCD
Display of values in the curve set
Screen display of 5 curves, max.
D14-364GY/123 oder ER151-GH/-,
rectangular (8 x 10 cm), internal graticule
approx. 2 kV
adjustable on front panel
100-240 V ~ ±10 %, 50/60 Hz
approx. 36 Watt at 50 Hz
0° C to +40° C
Safety Class I (EN61010-1)
techno-brown
285 x 125 x 380 mm
Lockable tilt handle
approx. 5.6 kg