Basic Operation - everActive NC 1000 Plus Bedienungsanleitung

Power supply.
This charger should be used with
original power adapters only. When the
charger is powered up, LCD display
turns ON, if there are no batteries
inserted the "null" icon should appear.

6. Basic operation.

Once rechargeable batteries are inserted, their voltage
level will be shown on the
LCD display (for example
1.12V). Voltage readings will
be shown for first 4 seconds,
and afterwards for next 4
seconds display will show
"500mA" as default charging current. If not interrupted by
"Mode" and "Current" buttons within 8 seconds, the
default charge mode will start automatically. Operation
mode can be changed for all inserted batteries
simultaneously, anytime by holding "Mode" button, and if
change of electric current value is desired this operation
should be followed by pressing "Current" button. These
changes can be also made individually for each charging
slot by selecting "1,2,3,4" before holding "Mode" button.
7