Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONTENTS
1. Contents
2. Important Recommendations and Safety Instructions
3. Assembly Instructions
4. Mount, Use & Dismount
5. Computer manual
6. Cleaning, Checks and Storage/ Troubleshooting
7. Training instructions
8. Parts List – Spare Parts List
9. Notes
10. Exploded view
IMPORTANT RECOMMENDATIONS AND
SAFETY INSTRUCTIONS
Our products are all tested and therefore represent the highest current
safety standards. However, this fact does not make it unnecessary to
observe the following principles strictly.
1. Assembly the machine exactly as described in the installation in-
structions and use only the enclosed, specific parts of the machine.
Before assembling, verify the completeness of the delivery against the
delivery notice and the completeness of the carton against the assem-
bly steps in the installation and operating instructions.
2. Before the first use and at regular intervals (approximately every
50 Operating hours) check the tightness of all screws, nuts and other
connections and the access shafts and joints with some lubricant so
that the safe operating condition of the equipment is ensured. In par-
ticular, the adjustment of saddle and handlebar need smooth function
and good condition.
3. Set up the machine in a dry, level place and protect it from mois-
ture and water. Uneven parts of the floor must be compensated by
suitable measures and by the provided adjustable parts of the machine
if such are installed. Ensure that no contact occurs with moisture or
water.
4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath
the machine if the area of the machine must be specially protected
against indentations, dirt etc.
5. Before beginning training, remove all objects within a radius of 2
metres from the machine.
6. Do not use aggressive cleaning agents to clean the machine and
employ only the supplied tools or suitable tools of your own to assem-
ble the machine and for any necessary repairs. Remove drops of sweat
from the machine immediately after finishing training.
7. WARNING! Systems of the heart frequency supervision can be
inexact. Excessive training can lead to serious health damage or to
the death. Consult a doctor before beginning a planned training pro-
gramme. He can define the maximum exertion (pulse, Watts, duration
of training etc.) to which youmay expose yourself and can give you pre-
cise information on the correct posture during training, the targets of
your training and your diet. Never train after eating large meals.
8. Only train on the machine when it is in correct working order. Use
original spare parts only for any necessary repairs. WARNING! Replace
the worm parts immediately and keep this equipment out of use until
repaired.
9. When setting the adjustable parts, observe the correct position
and the marked, maximum setting positions and ensure that the newly
adjusted position is correctly secured.
10. Unless otherwise described in the instructions, the machine must
only be used for training by one person at a time. The exercise time
should notovertake 60 min./daily.
11. Wear training clothes and shoes which are suitable for fitness
training with the machine. Your clothes must be such that they can-
not catch during training due to their shape (e.g. length). Your training
shoes should be appropriate for the trainer, must support your feet
firmly and must have non-slip soles.
12. WARNING! If you notice a feeling of dizziness, sickness, chest pain
or other abnormal symptoms, stop training and consult a doctor.
12
Dear customer,
we congratulate you on your purchase of this home training sports unit
12
and hope that we will have a great deal of pleasure with it. Please take
13-15
heed of the enclosed notes and instructions and follow them closely
16
concerning assembly and use.
17
Please do not hesitate to contact us at any time if you should have any
18
questions.
19
Top-Sport Gilles GmbH
20-21
22
23
13. Never forget that sports machines are not toys. This appliance can
be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction con-
cerning use ofthe appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not make by children without supervision. Take suit-
able measures to ensure that children never use the machine without
supervision.
14. The appliance use only to be used with the power supply unit pro-
vided with the appliance.
15. Ensure that the person conducting training and other people never
move or hold any parts of their body into the vicinity of moving parts.
At the end of its life span this product is not allowed to dispose
16.
over the normal household waste, but it must be given to an assembly
point for the recycling of electric and electronic components. You may
find the symbolon the product, on the instructions or on the packing.
The materials are reusable in accordance with their marking. With the
re-use, the material utilization or the protection of our environment.
Please ask the local administration for the responsible disposal place.
17. To protect the environment, do not dispose of the packaging ma-
terials, used batteries or parts of the machine as household waste. Put
these in the appropriate collection bins or bring them to a suitable col-
lection point.
18. This machine is a speed-dependant machine, i.e. the power in-
creases with increasing speed, and the reverse.
19. The machine is equipped with 10-speed resistance adjustment.
This makes it possible to reduce or increase the braking resistance and
there by the training exertion. Turning the adjusting knob for the re-
sistance setting towards stage 1 reduces the braking resistance and
thereby the training exertion. Turning the adjusting knob for the re-
sistance setting towards stage 10 increases the braking resistance and
thereby the training exertion.
20. The maximum permissible load (=body weight) is specified as 150
kg. This machine has been tested and certified in compliance with EN
ISO 20957-1:2014 und EN ISO 20957-5:2016 „H/C". This item's com-
puter corresponds to the basic demands of the EMV Directive of
2014/30/EU.
21. The assembly and operating instructions is part of the product. If
selling or passing to another person the documentation must be pro-
vided with the product.
12
Attention:
Before use
read operating
instructions!
GB
Werbung
