Motorola solutions IMPRES 2 Benutzerhandbuch Seite 18

MN004263A01-AL
Chapter 3 : Charging Procedure
When batteries are used, normal wear reduces available capacity. At the successful completion of
calibration or reconditioning, IMPRES chargers compare IMPRES 2 or IMPRES battery capacity to the
battery rated capacity. When the capacity is at a very low value, the IMPRES 2 or IMPRES battery may
be nearing its end of service. The IMPRES 2 or IMPRES battery remains usable. In some scenarios,
it may be preferable to deploy the battery to someone who does not require large battery capacity to
complete a work shift.
APX NEXT XN battery comes with high temperature detection feature that is detectable from IMPRES
2 charger with software version V2.02 or newer. When this feature is enabled, the status LED
flashes Red and Green alternately upon charge completion for battery that went through prolonged
exposure (exceeding 10 minutes cumulatively) under extreme high temperature environment. The
charger displays the following:
REPLACE BATTERY
EXPOSED OVERTEMP
It is recommended to remove this battery out from the service.
18