Order
Icon
Name
12
PIP2
13
PIP3
14
SP
–
Split setup
Legend
PIP = Picture in picture
SP = Special PIP
7.1.7
Keypad
When renaming the cameras and setting the automatic scan delay a keypad is displayed.
Key
Camera renaming only: Cap
Camera renaming only: 123
Del
Description
4 camera images are displayed.
The camera image of the camera connected to CAM1 is displayed on the le side of the
monitor. In front of the camera image of CAM1 the camera image of the camera con-
nected to CAM3 is displayed in the center of the lower area .
The camera image of the camera connected to CAM2 is displayed on the right side of
the monitor. In front of the camera image of CAM2 the camera image of the camera con-
nected to CAM4 is displayed in the center of the lower area.
The camera images can be customized with additional settings (see
a mode
on page 22). Some operating functions are blocked (see
touchscreen functions
on page 21).
4 camera images are displayed.
The camera image of the camera connected to CAM1 is displayed on the entire monitor.
3 camera images are displayed in the lower area in front of the camera image of CAM1:
•
CAM2 is displayed on the right side.
•
CAM3 is displayed in the center.
•
CAM4 is displayed on the le side.
The camera images can be customized with additional settings (see
a mode
on page 22). Some operating functions are blocked (see
touchscreen functions
on page 21).
4 camera images are displayed.
1 camera image is displayed in each corner of the monitor.
The camera images can be customized with additional settings (see
a mode
on page 22). Some operating functions are blocked (see
touchscreen functions
on page 21).
Opens the layer settings.
Displayed only when the general camera mode is set.
Description
Set the letters to upper or lower case.
Switches the letters to special numeric characters.
Delete the last letter or numeric character before the cursor.
Setting the camer
Using additional
Setting the camer
Using additional
Setting the camer
Using additional
13