General - Honeywell 8010 Bedienungs- Und Installationsanleitung

Extinguishing Control Computer 8010 - Series 2
11

General

The Extinguishing Control Computer 8010 - series 2 is a fire alarm control panel with an integrated controller for
use in extinguishing systems from a single – up to eight extinguishing areas.
With a total of eight automatic alarm zones and 240 connectable automatic fire detectors, it is possible to
monitor a single extinguishing area as defined by the VdS Guideline 2496.
The fire alarm and extinguishing computer 8010 can be easily connected to the analog loop of the fire alarm
system 8000 via the attachable esserbus
computers 8010 can be operated on one loop in conjunction with other units, e.g. fire detectors or esserbus
transponders. This enables up to eight individual extinguishing areas to be monitored via one analog loop.
In addition, five permanently assigned inputs are available for connecting technical zones of units, for example
the manual alarm zone or the Emergency Stop zone. The required control functions can be realized with the
total of 13 programmable relay outputs.
A separate control and indicating panel can be installed in the housing door for individual operation of the fire
alarm and extinguishing computer 8010.
The Extinguishing Control Computer 8010 - series 2 must be configured via the programming software LMST
8010 (Part No. 775814).
VdS compliant fire alarm systems must be designed in accordance with VdS guidelines.
Any operation on the installed fire alarm system must only be carried out by authorised personal in
accordance with relevant safety procedures and in coordination with the emergency services.
Additional and updated Informations
The described features, specifications and product related informations in this manual correspond to
the date of issue (refer to date on the front page) and may differ due to modifications and/or amended
Standards and Regulations of the System design, Installation and Commissioning.
Updated documentations, informations and declaration of conformity are available for comparison on
the www.esser-systems.de homepage.
®
esserbus and essernet
62
®
communication transponder. Up to eight fire alarm and extinguishing
®
are registered trademarks in Germany.
®
FB 798352 / 11.07