Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Status LEDs
Status LEDs
The LEDs on both the front and the back panel of the computer module and the
user module let you control the operational status of the KVM extender at any time.
Meaning of the LEDs on the front panel
Area
LED
Power
Red.
Main
Status
Ready
System
Fail
Ident.
Meaning of the LEDs on the back panel
Area
LED
Trans-
left
mission
rechts
51 · G&D DP1.2-VisionXG-Fiber
Colour Status
green
on
off
green
on
off
yellow
on
off
flashing
green
on
flashing
off
red
on
off
blue
on
Colour Status
yellow
on
off
green
on
off
Meaning
The power pack is turned on and supplies the
required voltage.
The power pack is turned off or the connection to
the mains could not be established.
The power pack is turned on and supplies the
required voltage.
The power pack is turned off or the connection to
the mains could not be established.
The device is ready for operation.
The device is not ready for operation.
Internal error
Initialisation has been completed successfully.
Faulty initialisation
Initialisation is carried out or device is turned off.
The device is not ready for operation.
The device is ready for operation.
Flashes after the LED has been activated via web
application.
Meaning
Initialisation of interface completed.
Initialisation of interface is carried out or device is
turned off.
Connetion to remote side has been successfully
established.
Connection to remote side could not be establis-
hed.
Werbung
Kapitel
Inhaltsverzeichnis
