Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. MAINTENANCE
6.1 ROUTINE MAINTENANCE (ADDRESSED TO THE USER)
During production, cleaning and maintenance operations, never touch the machine with
hands or tools without making sure that the machine has been disconnected from mains.
In case of troubles, make sure that they are not caused by a lack of servicing. On the
contrary, ask for the intervention of a FRIGOMAT customer service. In case it is necessary
to replace a piece, always ask a distributor or an authorized retailer for ORIGINAL spare
parts.
It is advisable to make the machine be checked by a Customer Service every 6/8 months.
17 - ENGLISH
6.1.1 CLEANING AND SANITIZATION
Bacteria and moulds easily proliferate due to the
presence of fats in cream that is why it is necessary to
carefully wash and clean all parts in contact with the
product, such as the cylinder, the agitator and the
door.
Rustles materials and/or made of plastic for food
industry used for our machines, in conformity with the
most severe international standards, make washing
operations easier, however they cannot prevent mould
proliferation, etc. caused by insufficient cleaning.
FRIGOMAT recommends cleaning the tank and the
parts in contact with the product after the employment
and in any case in compliance with the sanitary
standards in force in the country of installation. To
thoroughly clean your batch freezer, proceed as
follows:
1. Pour some liters of clean cold water into the
cylinder.
2. Press the MIX pushbutton and let the machine run
for a few minutes. Press STOP, pull down the
lever and move it to the right for the extraction of
the cleaning water. Replace the lever of the outlet
door to the center and repeat the operation until
the water coming out of the cylinder is clean.
3. Pour detergent solution/sanitizer into the cylinder.
4. Press the CLEANING pushbutton and let the
machine run for a few minutes. Press STOP and
let all the solution off.
5. To disassemble the door, pull up the handle till the
dechuck; slide the hinge pin and remove the cover.
Slide the sealing gasket. Clean carefully and
sanitize.
Werbung
