Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Securely fix the set to the wall. Pull the bracket forward and
unfold it. Insert the bracket to the assigned area of the angle
adjustment bracket and tighten the supplied 8 screwsⓑ.
(Same for both left and right side)
3
Remove the screws from the main body of the TV, assemble the 4 enclosed
plastic hangers and screwsⓒ as shown by the figure and firmly fasten them to
the back of the main body of the TV.
Mount the product on the wall bracket. Be sure to check on the left and right side to see if it is properly fixed.
Be careful when installing the product or adjusting the angle as fingers can be caught in the holes.
Be sure the wall bracket is securely fixed to the wall. Falling down the product may cause physical damage.
Screwⓑ 4EA
Screwⓒ 4EA
Screwⓑ 4EA
Werbung
