Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
2 / INSTALLING YOUR APPLIANCE
ELECTRICAL CONNECTIONS
•
During installation and maintenance operations,
the appliance must be unplugged from the
electrical grid; fuses must be cut off or removed.
The electrical connections are made before the
appliance is installed in its housing.
Ensure that
- the electrical installation has sufficient voltage,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
Warning
If the electrical installation at your
residence requires any changes in order to
hook up your appliance, call upon a
professional electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse
corresponding to the electrical socket where
your appliance is plugged in.
Models AG856, AG857, AG9501:
Warning
This appliance must be grounded.
We cannot be held responsible for any
accident resulting from an inexistent,
defective or incorrect ground lead.
In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has
not got any other device ensuring omnipolar
disconnection from the electricity main, with a
contact opening distance of at least 3mm, such
separating device ensuring disconnection from
the main must be included in the fixed installation.
This appliance is delivered with a H05VVF power
cord that has three-0.75mm
phase and ground). It must be connected to the
main power supply (which should be a 230-240V
single phase current) via a CEI60083
standardised socket that should remain
accessible after installation, in keeping with
installation guidelines.
If the power cable is damaged, call the after-sales
service department in order to avoid danger.
All manuals and user guides at all-guides.com
conductors (neutral,
2
Models AG826, AG828, AG836:
Warning
This appliance has such technical
particulars that it belongs to class II
insulation, therefore it must not be earthed.
In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has
not got any other device ensuring omnipolar
disconnection from the electricity main, with a
contact opening distance of at least 3mm, such
separating device ensuring disconnection from
the main must be included in the fixed installation.
This appliance is delivered with a H05VVF power
cord that has two-0.75mm
and phase). It must be connected to the main
power supply (which should be a 230-240V single
phase current) via a CEI60083 standardised
socket that should remain accessible after
installation, in keeping with installation guidelines.
If the power cable is damaged, call the after-sales
service department in order to avoid danger.
24
conductors (neutral
2
Werbung
