Duonix Bike Scan Bedienungsanleitung Seite 25

All manuals and user guides at all-guides.com
Note:
Similar
Communication with the control unit is not possible or control unit is not present.
Check the voltage supply, if applicable, if the selected control unit is installed in the
vehicle and check the ignition again.
Service functions:
With the special functions various maintenance work and coding can be carried out on
the vehicle electronics. Depending on model and type, the functions are listed here.
Please, therefore, be sure to observe the manufacturing specifications and the
procedure for carrying out the process.
Service Reset:
The service reset is performed in the diagnostic device via the function KM Reset and Data
Reset.
The route KM Reset is used to set the distance. A maximum value of 10.000 KM can be
stored here.
The data reset item stores the date when the service is due. This can be reset by a maximum
of two years. When entering the day, the following day must always be entered. Please note
that for new models the service interval is maximum of one year.
Note:
In the case of motorcycles with a current interruption for example, battery change or winter
time and exceeding the service. The current time and date must be programmed via the
diagnostic device (Date -Reset). A service reset can't be carried out until the current time
and date have been stored.
-9-